Europe's largest economy, Germany, recently activated an emergency plan to manage gas supplies that the natural gas could be rationed if supplies are disrupted or disrupted by a stand-off over Russian demands to pay for fuel in rubles.
German Vice-Chancellor, minister of economy and climate protection, said Germany's gas supplies were secure for now, but he urged consumers and businesses to reduce consumption, saying "every kilowatt of electricity counts."
Germany's gas network regulator can ration gas if supplies run short. Plants would be the first to be affected. Special treatment will be provided to private families, hospitals, and other important institutions.
Half of Germany's 41.5 million households use natural gas for heating, and industry consumption accounts for a third of the country's 100 billion cubic meters of gas demand in 2021.
The price of many energy and commodities like the Hafnium Diboride could be affected.
About Hafnium Diboride HfB2 Powder:
Hafnium boride is a gray crystal with a metallic luster. It has high conductivity and stable chemical properties. It hardly reacts with all chemical reagents (except hydrofluoric acid) at room temperature. It is prepared by mixing hafnium dioxide, boron oxide or boron carbide, carbon powder and heating, or by reducing hafnium tetrachloride and boron trichloride through hydrogen reduction at 2,000°C or directly reacting hafnium and boron. It is used as a high-temperature alloy.
Hafnium diboride has high melting point, high hardness, good electrical and thermal conductivity, and good neutron absorption performance. It has important applications in the fields of ultra-high temperature materials, superhard materials, electrode materials and neutron absorption materials.
With the development of material technology, the application fields of hafnium diboride ceramics and composite materials are becoming more and more extensive. Obtaining low-cost, high-quality hafnium diboride powder is currently an important research and development director at home and abroad. Hafnium diboride is difficult to sinter. In order to improve the sintering performance, it is necessary to obtain an ultrafine powder. Although nano-powder has superior performance, its cost is high, and it is difficult to disperse during raw material processing, and the process is more difficult. Therefore, the development of sub-micron hafnium diboride powder has been paid more and more attention.
Hafnium diboride belongs to the class of Ultra-high-temperature ceramics, a type of ceramic composed of hafnium and boron. It has a melting temperature of about 3250 °C. It is an unusual ceramic, having relatively high thermal and electrical conductivities, properties it shares with isostructural titanium diboride and zirconium diboride. It is a grey, metallic-looking material. Hafnium diboride has a hexagonal crystal structure, a molar mass of 200.11 grams per mole, and a density of ~10.5 g/cm³.
Hafnium diboride is often combined with carbon, boron, silicon, silicon carbide, and/or nickel to improve the consolidation of the hafnium diboride powder (sintering). It is commonly formed into a solid by a process called hot pressing, where the powders are pressed together using both heat and pressure. Feel free to send an inquiry to get the latest price if you would like to buy Hafnium Diboride HfB2 Powder in bulk.
Specifications of Hafnium diboride HfB2 powder:
Hafnium diboride powder MF: HfB2
Hafnium diboride powder CAS: 12007-23-7
Hafnium diboride powder EINECS: 234-500-7
Hafnium diboride powder Density: 10.5 g/cm3
Hafnium diboride powder Melting point: ~3250 °C
Hafnium diboride powder MOQ: 1kg
Hafnium diboride powder Particle size: nano, micro and as customers' request
Hafnium diboride powder Package: Aluminum bag,Vacuum packing, 1kg/bag, or as your request.
Features of Hafnium diboride HfB2 powder:
Hafnium diboride is an ultrahigh temperature ceramic composed of hafnium and boron. It has a melting temperature of about 3250 degrees Celsius. It is an unusual ceramic, having relatively high thermal and electrical conductivities, properties it shares with isostructural titanium diboride and zirconium diboride. It is a grey, metallic looking material. Hafnium diboride has a hexagonal crystal structure, a molar mass of 200.11 grams per mole, and a density of 10.5 grams per cubic centimeter.
How is Hafnium Diboride HfB2 Powder produced?
The combustion synthesis method of high-purity hafnium diboride powder is realized according to the following steps:
1. Mix the basic raw materials and diluents. The basic raw materials include hafnium dioxide, boric anhydride and magnesium powder. The percentages by weight are: hafnium dioxide: 30% to 60%, boric anhydride: 10% to 40%, magnesium powder ：15%～50%, the weight of the added diluent hafnium diboride is 0～3 times of the basic raw material;
2. Drying and mixing;
3. Load the uniformly mixed raw material powder into a graphite boat, and then put it into a closed pressure vessel. The closed pressure vessel is cooled by circulating water, and the reaction is maintained under a protective atmosphere with a pressure of 0-5Mpa or under vacuum conditions. The raw materials are self-propagating combustion and transformed into products;
4. Take out the product after cooling. The product is a mixture of hafnium diboride and magnesium oxide. The magnesium oxide is removed by acid washing, and then the hafnium diboride is washed with water, filtered and dried to obtain hafnium diboride powder.
Applications of Hafnium Diboride HfB2 Powder:
Hafnium diboride is used in wear-resistant coatings. Its use has also been looked at for use in ultra-high-temperature composites in conjunction with silicon carbide (SiC), due to its excellent refractoriness. The addition of silicon carbide improves its oxidations resistance.
The oxidation resistance of hafnium diboride is dependent on the temperature and pressure. At a temperature of 1500 °C and 1 atm of pressure, a protective oxide scale of hafnia forms. When temperatures rise above 1600 °C and pressures drop below 1 atm, the oxidation resistance of HfB2 is dramatically reduced. Under these conditions, the boiling temperature of B2O3 (one of the oxidation products of HfB2) is exceeded and the protective oxide layer.
The material has potential for use in hypervelocity reentry vehicles such as ICBM heat shields or aerodynamic leading-edges, due to its strength and thermal properties. Unlike polymer and composite material, HfB2 can be formed into aerodynamic shapes that will not ablate during reentry.
Hafnium diboride is also investigated as a possible new material for nuclear reactor control rods.
Hafnium diboride is also being investigated as a microchip diffusion barrier. If synthesized correctly, the barrier can be less than 7 nm thick.
Storage Condition of Hafnium diboride HfB2 powder:
Damp reunion will affect HfB2 powder dispersion performance and using effects, therefore, hafnium diboride HfB2 powder should be sealed in vacuum packing and stored in cool and dry room, the hafnium diboride HfB2 powder can not be exposure to air. In addition, the HfB2 powder should be avoided under stress.
Packing & Shipping of Hafnium diboride HfB2 powder:
We have many different kinds of packing which depends on the hafnium diboride HfB2 powder quantity.
Hafnium diboride HfB2 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Hafnium diboride HfB2 powder shipping:could be shipped out by sea , by air, by express?as soon as possible once payment receipt.
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for hafnium diboride, please feel free to contact us and send an inquiry, email address: firstname.lastname@example.org
Hafnium Diboride Properties
|Other Names||hafnium boride, HfB2 powder|
|Melting Point||3250 °C|
|Solubility in H2O||N/A|
Hafnium Diboride Health & Safety Information
Recently, the Turkish government announced that the Turkish President has signed a presidential decree to provide incentives for its Black Sea gas field development projects, including tax exemptions and other preferential measures.
With a fixed investment of 145.1 billion Turkish lira ($10 billion), the project will employ 1,018 people and produce 14 billion standard cubic meters of gas per year, the decree reads. The incentives involved include tariff and VAT exemptions, as well as a range of tax cuts.
In June 2021, Turkish drill ships discovered 135 billion cubic meters of natural gas in the Sakaria field in the Black Sea, bringing Turkey's total gas discoveries in the region to 540 billion cubic meters.
Turkey imports almost all of its annual gas consumption of about 50 billion cubic meters.
Except for natural gas, the supply and prices of many other Hafnium Diboride will continue to be influenced by international situations.
Titanium carbide TiC powder is a crystalline solid with gray metallic luster, hard quality, second only to diamond in hardness, and weaker in magnetic properties. For the manufacture of cemented carbide, also used as electrodes and abrasives for arc…
Calcium silicide is used in the manufacture of special metal alloys, for example for phosphorus removal and as a deoxidizer. Calcium silicide is used in the manufacture of special metal alloys, for example for phosphorus removal and as a deoxidizer.…
Niobium carbide (NBC and Nb2C) is a very hard refractory ceramic material, widely used in refractory high temperature materials and cemented carbide additives.…